SafetyLink ™ Pty Ltd has been operating as a manufacturer of Height Safety equipment for over a decade.
Our product range includes anchors, staticline systems, permanent ladder systems and ladder stabilizers.
Our anchor range includes the SafetyLink ™ Energy Absorbing Eyebolt.
This eyebolt was developed and tested extensively to maximize energy absorption while retaining its strength when arresting a fall.
The eyebolts tapered design enables it to bend like a fishing pole to reduce the load back on the structure and the person attached to the anchor.
This unique energy absorbing quality has been incorporated into all of SafetyLink ™ anchors.
The SafetyLink ™ Energy Absorbing Eyebolt is available in two purpose built designs.
The Standard Eyebolt is designed for fall arrest, the eyebolt’s long tapered stem is designed to absorb energy while arresting a fall therefore reducing the load off the structure and the person.
To maximize this design the eyebolt starts to bend at a lower load. The standard eyebolt is not designed for a constant live load.
The Abseiling Eyebolt is a fall arrest anchor which uses the same tapered concept as the standard eyebolt but incorporates a broader design enabling the eyebolt to withstand a live load without activating the bending motion that occurs when arresting a fall.
The Standard and Abseiling eyebolts have been tested to over 24kN force.
The SafetyLink ™ StaticLine range uses the same tapered principle to ensure all end anchors and intermediates have the same energy absorbing capabilities.
Our streamlined design ensures traversing across a surface with our pass through intermediates a safe and simple task.
SafetyLink ™ products can be attached to a number of different surfaces such as steel purlins, timber rafters, concrete, brickwork and metal roof sheeting.
Typical uses of SafetyLink ™ products include trades people working at heights on buildings and building sites in the following situations:
› Installation of roofing
› Installation and dismantling of safety rails
› Solar heating
› Electrical and plumbing work
› State emergency service personnel
› Repairing damaged roofing
› General roof and building maintenance
› Air conditioning and roof ventilation
› TV aerials and satellite dishes
› Cleaning at heights
All SafetyLink ™ products undergo extensive testing in a multitude of scenarios and our experienced technical support team is complemented with comprehensive installation manuals.
WARNING - Any installation of height safety components/products must be carried out by a competent person.
Person/s must be safe at all times.
READ ENTIRE HANDBOOK BEFORE USING ANY SAFETYLINK PRODUCT.
FAILURE TO FOLLOW ALL WARNINGS AND INSTRUCTIONS MAY RESULT IN A SERIOUS INJURY OR DEATH.
STANDARD EYEBOLTS MUST ONLY BE USED AS A FALL ARREST ANCHOR.
ABSEILING EYEBOLTS ARE TO BE USED FOR ROPE ACCESS (ABSEILING).
SURFACE MOUNTED ANCHORS MUST NOT BE USED FOR ROPE ACCESS (ABSEILING).
SafetyLink’s surface-mounted multi-directional FrogLink™ will set a new benchmark in the field of height safety.
This revolutionary all in one unit has been designed to attach to all metal profiles with a single row of attachment holes. This unique configuration makes it a fast simple unit for installation.
Its low profile reflective design is a plus for any commercial or residential enterprise wanting to maintain an aesthetically pleasing façade.
The FrogLink™ doesn’t just look good, its dynamic design reduces the load back onto the structure and person attached to the anchor from 25.76kN to 3.1kN.
SafetyLink’s FrogLink™ is tested and manufactured in accordance with the applicable Australia and New Zealand Standards AS/NZS 1891.4 and is rated as a two person anchor.
TileLink Complete Unit
PRODUCT CODE: TILEL001
Quick to install, with amazing performance ability SafetyLink’s patented TileLink™ is the perfect anchor for tile and slate roofs.
It combines energy absorbing capabilities with a design that is practically invisible when looking at the roof.
The TileLink’s design emulates the extraordinary FrogLinks™ energy absorbing regions, allowing it in the event of a fall to reduce the impact on the structure and person attached to the TileLink™.
Its sleek design means fixing to a rafter is a simple task of screwing five (12 gauge, 50mm roofing screws) through the TileLinks existing holes. Five alternate fixing rows enable the TileLink™ to be positioned to suit the pattern of the roof tile. The TileLink™ fits snuggly between the existing tile eliminating waterproofing issues.
The 316 stainless steel TileLink™ is tested and manufactured in accordance with the applicable Australian and New Zealand Standards AS/NZS 1891.4 and is rated as a two person anchor.